Here at Andrews Coatings we have varied products and some of these specialist coatings have been certified to be used with food and drinking water. Below we have listed January s top 3 products.
Rust-Oleum 5500 Solvent Free Epoxy
Rust-Oleum 5500 is a solvent free epoxy which is certified for direct contact with food. A two coat Rust-Oleum 5500 System assures appropriate protection when contacted with chemicals, frequent chemical cleaning or high humidity and moisture conditions. Although not food related, this product is also suitable to be used on swimming pools. You can check this out on an earlier blog.
Rust-Oleum 8300 Hygienic Wall Coating
This particular product works well in fridges as it can be applied at 0°C. Rust-Oleum 8300 Hygienic topcoat is a single pack solvent based paint for hygiene controlled areas. Use it on walls and ceilings to protect from: mild chemical exposure, occasional product spillage, frequent chemical cleaning, intermittent high humidity and also moisture. It is also recommend to use the appropriate primer.
Acothane DW
Acothane DW is one of the most common WRAS approved paints in the UK. Acothane has been used on reservoir pipework, concrete water tower , steel contact tanks and many other water storage areas. Use for metallic, cementitious, composite and GRP tanks, vessels, reservoirs ,pipelines, pipe bends and random lengths, valves and fittings holding or transporting drinking water.
So that shows you what our top 3 products are this month. Not only do we have these products available with certificates of approval, we have many others just check them out by clicking here. If you need any further advice or would like to talk to one of our technical advisers please call 01902 710057.