Sigmacover 456
£86.38 – £418.84
Two component high build polyamide cured recoatable epoxy coating.
ColourShop® - CHOOSE A COLOUR
Choose your colour from the colour charts here.
SKU: AC1061
Categories: Metal protection, Metal Protection, Metal Topcoats, Sigma, Sigmacover, Two Pack
Description
Sigmacover 456 is a two component, high build, polyamide cured epoxy coating to use on steel and also concrete substrates. It’s recoatable with a variety of different Sigma paints, depending on what you need them for. Please see the System Sheets (in the downloads section) to view the recommended systems.
Apply to most aged, sound alkyd, chlorinated rubber and epoxy coatings. Best suited for use in coastal and industrial environments and can be used on structural steel and concrete appliances.
Key features
- A high relative humidity does not usually influence the quality of the coating.
- Recoat with various two component and also conventional coatings even after long weathering periods.
- Resistant to water as well as the splash of mild chemicals.
- Excellent durability as well as high wear.
- Tough, with long term flexibility.
- Cures even at temperatures down to -10 degrees C.
- Good adhesion to on most aged, sound alkyd, chlorinated rubber and also epoxy coatings
Sigmacover 456
- Coverage: 6.5 m²per litre for 100μm.
- Touch Dry: 2 Hours.
- Apply using an Industrial Spray Gun, Roller or Brush
Additional information
Colour | Black, White, ColourShop®, Golden Yellow-RAL 1004, grey BS 00A05 |
---|---|
Content |
Product Datasheet:
Safety Datasheet:
System Sheets:
System 3102 for Boottop and Topside
Related products
Rust-Oleum 9169 Epoxy Rust Primer
£157.45 Ex.VAT | £188.94 Inc.VAT
Rust-Oleum 2100 Hard Hat Topcoat
£10.95
Rust-oleum 2500 Hard Hat Transparent Topcoat
£11.25 Ex.VAT | £13.50 Inc.VAT