Thermoguard Thermocoat WI
£68.45 – £298.95
Description
Thermoguard Thermocoat WI is a water based intumescent basecoat for structural steel and cast iron. It gives fire protection for up to 120 minutes of fire protection. It is then overcoatable with Thermoguard Flame Retardant finishes (Eggshell/Gloss). It is important to select a decorative overcoat system that will enhance the building’s architectural and design features. The range of topcoats are either water-based or 2010 compliant and safe to use in accordance with manufacturer’s instructions.
Using Thermoguard Thermocoat WI is both environmentally friendly and low-odour.
Remove any rust and mill scale from the surface and then prime with Thermoguard High Build Metal Primer to 75 microns DFT in accordance with manufacturer’s instructions. Galvanised steel should be degreased and primed with a suitable etch primer.
Key Features
- Water based.
- Intumescent basecoat.
- Use for structural steel and also cast iron.
- Coverage:
- For 30 mins protection: 1 thick coat – 2.5kg 4 linear m, 5kg 8 linear m, 20kg 32 linear m – if in any doubt please contact us.
- For 60, 90 or 120 minutes protection: contact us for further advice specific to your project.
- Touch Dry: 4 Hours.
- Apply using a brush, roller or a spray.
Specification Enquiry
Fill out the form below and send it over to info@andrewscoating.co.uk to get your specification:
Related Products:
Additional information
Content | |
---|---|
Brand | |
Colour |
Reviews
There are no reviews yet.
Be the first to review “Thermoguard Thermocoat WI”